Description- SPanthera 145 PER Autoplaten® press N° 0566.003.02 Year 2005
- Standard equipment
- Short stroke movable platen, driven by a cam mechanism.
- WASTE STRIPPING STATION
- BLANK PILE DELIVERY STATION
Equipment Included- 1 B-41 Additional "CUBE" control panel
- 1 B-75 Cabinet for pump's
- 1 C-9 Additional multidirectional lateral blowers
- 1 C-81 Lengthwise motorised movement of the suction unit
- 1 D-7 Reinforced transport equipment
- 1 E-3 Upper chase with quick locking : fixed bottom plate
- 1 E-95 Set of 20 thin plates, thickness 1mm
- 1 E-58 Perforated compensating plate
- 1 F-2 Upper pull-out frame
- 1 F-8 Lower pull-out frame
- 1 F-69 Sheet travelling control photocells
- 1 H-21 Upper pull-out frame
- 1 H-72 Long blank separating tools 151 mm
- 1 H-78 Full sheet delivery system
- 1 M-5 Chase changer
- 1 M-11 Control table on platform
Technical dataCONVERTIBLE STOCK:
- Paper (depending on quality), from 80 g m2
- Board (depending on quality), up to 2000 g m2
- Corrugated board, up to 5 mm
- Complementary equipment D-71 for wrapped corrugated board
- and microflute.
- Board wrap allowed : 4% of the sheet's width.
- SIZES
- Sheet size, max. 1450 x 1050 mm
- Sheet size, min. 580 x 450 mm
DIECUTTING SIZE:
- With gripper margin, max. 1450 x 1035 mm
- DIMENSION OF PALLETS
- Feeder delivery, max. 1450 x 1050 mm
- Delivery, min height 150 mm
DIECUTTING:
- Gripper margin 9 - 17 mm
- Height of cutting rules 23.8 mm
- Width of double cuts, min. 5 mm
PRODUCTION:
- Adjustable platen pressure, max. 5,5 550 t MN
- Production rate, up to sph 7500
PILE HEIGHT:
- Feeder : normal mode, max. 2000 mm
- Feeder : Non-Stop mode, max. 1600 mm
- Delivery : max. 1600 mm
INSTALLATION:
- Main motor power, max. 30 kW
- Total connected load, max. 100 kVA
APPROXIMATE WEIGHT:
- Net 64500 kg
- Gross in seaworthy packing 73500 kg
- Fully Cleaned and Painted
- New Chains
- All motors serviced and cleaned
- New oil and filters replaced
- Grippers checked and replaced if need be
- All pneumatic pipes , blast and suction replaced
- feeder serviced parts replaced where need be.
- All electrical functions checked, servos replaced if need be.
- Machine will be rebuilt and powered for up for inspection and resting
- Bobst UK will be brought in to relevel the bed and check chains as per Bobst tolerance. Bobst will then carry out full report of register.
- Bobst certificate , Bobst report copy will be issued.
Estimated time line 12 – 16 weeks before this Bobst will be completed.